What is the maintenance schedule for the Rivian Commercial Van?
Rivian recommends the following maintenance be performed on time for Rivian Commercial Vans.
Tire Rotation
Flexible options for fleet managers based on tire inspection frequency:
Infrequent inspections: four-tire rotation every 6,000 mi (10,000 km), to ensure even wear and extend life
Standard inspections: perform a single four-tire rotation at 50% average wear of a tire set. This allows replacement of four tires at the same time with only a single rotation
Frequent inspections: replace both tires on the same axle before the wear indicators appear on either tire. This allows for a no-rotation option
Refer to the Rivian Commercial Van Tire Service Guide for important information and warnings.
Multi-Point Inspection
Every 12,000 mi (20,000 km)
Examines interior and exterior of the vehicle to ensure normal and safe operation.
Covers the following, and more:
Tire pressures and tread depth
Brake pad thickness
Suspension damage, wear, and fastener torques including lug nuts
Vehicle windows for chips and cracks
Vehicle functions check
Windshield washer, brake fluid, and coolant level check
Windshield washer jets and wiper blades
Comprehensive Inspection
Every 36,000 mi (60,000 km)
Includes all Multi-point inspection items, the following, and more:
Test brake fluid for moisture content and system corrosion
Brake rotor thickness
Test coolant for degrees of protection
Inspect low-voltage battery
Driver assistance sensor inspection
Seat heating and cooling operation
Operation and cosmetic condition of additional interior and exterior parts
Inspect additional underbody and suspension components for damage
Verify interior light operation
Inspect radiator for damage or debris
Other Maintenance Items
Every 3 years: replace brake fluid
Every 108,000 mi (180,000 km): replace coolant and coolant filter
Every 108,000 mi (180,000 km): replace drive unit fluid
Did you get the answer you needed?